Light Roast V60 Switch
This recipe will bring out each note listed on a lightly roasted coffee. It involves two blooms, two additional pours, and a grind that brings draw down to around four minutes.
Recipe details:
Coffee:
Grind Settings:
Water:
Equipment:
Step 1 — First Bloom (Switch open)
0:00 - 0:45
With the switch open, pour 60 g of water in slow spirals, wetting all grounds. Let the coffee bloom until around 45 seconds.
Step 2 — Second Bloom (Switch closed)
0:45 - 1:30
Close the switch, pour 60 more g of water in an osmosis style, beginning very slowly in the center and moving in slow outward spirals eventually. After 60 g have been poured, swirl the switch in each direction to release CO2.
Step 3 — Third Pour (Switch open)
1:30 - 2:30
Open the switch and pour 70 g of water in slow spirals, avoiding pouring directly on the paper filter. Pour slowly enough that grounds are visible. Let the water draw down, with the correct grind size, this should be around 50 to 60 seconds.
Step 4 — Fourth Pour (Switch open)
2:30 - 3:30
Repeat the same steps as the third pour.
Step 5 — Final Pour
3:30 - 4:15
Finish the brew by pouring water to your desired ratio. I recommend 1:13 for a bold and fruity light roast profile. It is possible to go up to 1:15-1:16 if you wish, but I would not go lower than 1:13. For this recipe, this would be a final pour of around 65 g of water. This final draw down should take around 40 to 50 s.